wall – Peacock Orchard

Country Kitchen Update- Almost done!

The kitchen remodel has been fairly slow. Removing walls, rewiring and plumbing and repairing walls has been extremely time consuming. Above is what this particular wall of cabinets looked like before I finally figured out what to do to finish the top cabinets with. There was a large amount of blank space on both sides of the top cabinets before.

Now there is a beautiful coffee and wine rack on either side of the old cabinets. I made them out of 1×12 boards and sweat. I think they look fabulous!

The wall color pops on the inside of each new cabinet extension.

We always need wine storage so this is a great way of getting it!

We did the same counter top on both sides but kept the wood planking to the back splash only on this side.The toe kick hasn’t been touched yet as we are going to redo the floor first.

The top of these cabinets was made into a shelf used to display…well I haven’t worked that all out yet. It looks half way decent now at least.

That beautiful sign makes the kitchen sparkle.

Now to redo the island. That is going to be the biggest task so far!

How to deal with challenges when remodeling

Drink. Ha! Post over.

No, no, I partially kid.

It seems when removing walls you should expect the unexpected. Random wires. Random water lines. Etc. Etc. I prefer to hope for the best myself. The plan for the kitchen was to remove the wall that separated the kitchen from the rest of the house. We have these pillars there. The one on the opposite side of the house is load bearing. We assumed the matching pillar would be the same. Turns out the pillar is hollow. Aesthetic only.

The wall, however, load bearing. What a depressing discovery. I lost a lot of steam when I pried the dry wall off that obviously load bearing section of wall. We thought we may be able to move it into the pillar as planned but then I found another small section of load bearing wall on the other side of the pillar.

That wall is not coming down. Plans must be modified. There are cabinets on that wall already. Now we might as well leave them and expand them into an L. I really want a counter height sitting area so the kids can be with me while I’m doing kitchen stuff. I was also hugely looking forward to expanding the aisle between the cabinets and island. With the kids on stools and ladders helping, and dogs hanging out in the hopes of dropped food, there is no space to move around in our current kitchen. So, on top of the new L’d section of cabinets I’m going to remove our hideous current island and build a thinner wood island in it’s place. I now also have to patch up all the holes in the side of the wall I’d removed. That drywall would have been removed anyway, as electrical had to be changed, but I would have done smaller sections if I’d known I’d have to patch them back up.

I’ve lost so much steam over this discovery it’s been less exciting to continue. Still, the part of the wall that can be removed, is gone, and it’s glorious!

Before

After

Current plans are to strip and paint the remaining cabinets. Build a new island and remove old one. Tile the floor (laminate sucks!). Nap, possibly forever.

Here are a few pics of the wall removal, just for fun.

This part of the wall was never to be removed but I did have to remove the drywall so we could change the dinning room light switch from the wall that I removed to this. Thankfully the wire went over to this wall anyway so it was a simple fix, for my father. I claim to have done 0 of the electrical work here. My father is amazing!

The Wonderful World of Pallets

A post by Orchard Husband

I love the versatility of pallets. I looked around to see if there was a guru on making almost anything from pallet wood; and while there are hundreds of sites that have “80-100 uses for pallets” I didn’t find any site dedicated solely to making fine products using free pallet wood.

A week or so ago my wife asked me about upgrading out kitchen. One of the upgrades was building a sort of wall using reclaimed pallet wood. Sort of like this. So, the first thing you have to figure out is where to get your pallets. Pallets can be had for free at most places, try your local hardware stores, the one where we live has a designated area where they stack pallets and anyone is welcome to grab what they need.

Once you have a nice stack* of pallets (*do or/don’t go overboard, there is a lot of wood to be had if you grab some good pallets with plenty of boards on them, you can always use the pallets for other projects). you need to separate the deck boards from the stringer or blocks (depending on the design of the pallet) as the pallet wall will consist entirely of deck board. Now, there are a lot of ways to do this, some with varying degrees of difficulty.

Pry bar method:

I did this back when we lived in Japan, as I provided the firewood for a couple bonfires at the beach we went to. I could only fit two good size intact pallets in my station wagon, but if I broke them down into the individual deck boards and stringers I could usually get around seven to eight pallets worth of wood in the same space. Since I was using this at the beach I had to remove the nails, so this method is a pain. You can find 100s of videos on you tube, and if you are going to use pallet wood for a wall I would not recommend this method as I splits about 99.9% of the wood.

Leverage with 2x4s:

I saw a video where some guy was using a couple of 2x4s, placing them adjacent to the deck board they wanted to pry up on each side and using it to lift the wood out safely and without breaking any of the wood. I had moderate success and moderate failure with this, for a couple reasons.

How can you be successful with this method? You need to have a pallet with good spacing where you can even get a 2×4 or whatever size wood you are using to pry the deck boards off with. The deck boards have to be in pretty decent condition. And the extra boards you need to make your fulcrum have to be pretty long or they’ll just slide and cause problems.

How can you fail miserably with this method? Use a pallet with weathered deck board, or boards with minute cracks and the they’ll just shatter when you try to lift them up. if the deck boards are too narrow to put your levers in, it won’t work. The wider the prying tool the better. I tried to use a couple tamping bars and they just shattered the wood.

So, if the pallets are in decent shape and have enough spacing you can recover the deck boards pretty easily with little to no damage. You’ll just have to hammer out all the nails.

Pallet break down tool:

I didn’t actually use this method, I just saw a couple videos on youtube, and it’s basically the same principle as the leverage method. but you weld some metal bars together along with your handle (the longer the better), place the slots in between the boards and pull up, and the board come out. I think this method would work pretty well, and if you were going to be doing lots of pallet projects I’d invest in building one of those tools.

Cutting with a reciprocating saw:

I ended up doing this method on 98% of the boards we ended up using. Lots of youtube videos showing you how to do this method. but a few takeaways I have. Invest in a 10-12 inch all purpose blade. there are going to be pieces of wood and widths where it’ll save you a lot of time and effort. Also, to leave the nails in or not. Some people say it gives the deck boards character, and if you want to leave them, be my guest, but some of them are a little loose and it’s best to just remove them. One youtube video I watched talked about using a nail punch to remove them. I just used a nail and I’d tamp out the bits and pull them out with a claw hammer.

It is also nice to have some sort of tool to separate the wood a bit for the deck board pieces that don’t have any gaps to put the saw blade in between. It should take a couple seconds to go through each board if you are hitting the nail only. If it takes any longer than that, you are sawing through wood and I’ve heard of people that have killed their reciprocating saw breaking down pallets.

——————

After you have your wood just sand and stain, but I’ll leave that post to my wife to explain.

Country kitchen remodel stage 1 of 5 in process

I was driving home from work recently when my mind finally figured out a problem in our kitchen design. The trash can was the problem. We had no other place to put it in the kitchen. At least we thought we didn’t. Last year I’d removed the drawers from one of our base cabinets. They were falling apart and their location made them a haven for mice. We’ve since fixed the mouse problem by purchasing this product and filling all the small holes and cracks in the house with it. We seriously haven’t seen a mouse since we did it. Life saver!

Anyway, so I had this blank base cabinet I was never getting around to turning into a pot rack. The trash fit nicely into it. With the trash moved I could finally take down a pointless wall that divided the kitchen from the laundry room. The kids enjoyed helping, and with hammers and eye protection passed around that wall came down. It did an amazing job opening up the space. It feels so much larger now. However, I had a damaged wall that I was going to have to do something with. We need somewhere to put our coats and boots. That has always been a problem in our household as the coats always seem to collect on the dining room table. So I planned to make mudroom cubbies. However, we liked the open feel so much I couldn’t see ruining it with cubbies. Thus we are doing a simple coat rack, a movable bench, boot trays and some wire baskets nailed to the wall. It was decided we would plank the wall from the kitchen into the laundry room to make the rooms flow better, as they are currently different colors. Once that was decided my mind took off and now we have a 5 stage remodel project that is going to change everything.

Stage 1- planking the wall, beautifying current cabinets installed on planked wall, new faucet and sink, open shelves to replace 1 wall cabinet.

Stage 2- moving the fridge and building a pantry.

Stage 3- remove cabinets, wall, and old island and build large island in it’s place.

Stage 4- lighting and fixing the ceiling as we currently have 2 recessed fluorescent lights.

Stage 5- fixing the flooring throughout.

So far in stage 1 I have boxed in the top of the wall cabinets that will remain. I always hated the space above them as it wasn’t enough to do anything with. I removed the wall cabinet and made and installed floating shelves. I’ve hung 3 coat racks in the laundry room. Seems excessive but we had a lot of wasted space in there so….. why not. I’ve ordered the sink and faucet and the Ardex required to cement coat our current counter tops. I’m still looking for planking wood. I think I want to use old fence panels and a local fencing company said they would call me when they had some I could take. I also need to purchase a bench and the boot trays I’ve decided on. Slow going as I am working full time, a mom and a farmer. Going all the same!

Here are a few pics of the wall demo. As you can see I got a bit nuts when we moved in and painted the kitchen a CRAZY mixture of reds, yellows and oranges. My cabinets are red….it’s horrible.

This is the coat rack getting screwed in.

This post contains an affiliate link.